Tile cutting machine is also known as: cross-tile machine. Electric desktop ceramic tile cutting machine is a popular common equipment on ceramic processing plants, which is one of the necessary products of ordinary processing plants. This machine has the function, cutting, high efficiency, fast speed, no collapse edge and other advantages. The big advantage of zui is that a piece of cutting piece can cut 400-600 meters of tile, the cost is very low.

Desktop tile cutting machine is a kind of tile cutting machine with dust and noise reduction power, belongs to the category of mechanical manufacturing technology. Its main technical characteristics are a honeycomb sponge between the dust cover and the tool, and a water inlet on the dust cover.

Because the ceramic tile cutting machine needs artificial manual operation, so there are certain safety risks, we must pay more attention to avoid safety accidents, to do the following points:

First, in the manual operation of the ceramic tile cutting machine, to pay attention to the cutting machine to the cutting edge, be carefully put, along the main axis of cutting, gently cut off the ceramic tile, do not use too much strength, so as not to cause fracture;

Second, in the process of cutting, should not be too high equipment operation, so as to avoid the blade and tile collision, and damage;

Third, because in the process of our operation, it is difficult to control the ups and downs of the operation surface, which requires that we check the flatness of the operation surface before cutting, the uneven operation surface can not be used to cut, will damage the knife head and cutting effect, or we can specially customize the knife head used to operate the undulating plane;

Four, when manually operating the cutting machine, if you want to break the brick surface, do not use the power of the blade, use the power of the whole fuselage to fracture the effect is better, the blade will also have a certain protective effect.