The usage of double group knife continuous brick machine:
1. Cut the ceramic tile with the cutting edge of the blade, open slot and select the blade with no notch (the whole round blade).
2. Cut one time to install 10-20 knives, cut out 11-21 bricks, usually cut into strips first.
3. cutting the need will be the first set of inserts installed, to install a second set of blades, two groups the number of blades as much, in front of a group of a group behind the blade to blade on a straight line, so that the cutting time won't have step, if the blade is not aligned, can cause some problems, such as: 1, cutting the steps, 2, cut wrong size, 3, easy card brick, 4, and easy to cut the whole piece of brick bad, 5, and may lead to mechanical tripping.
4. the batch processing is more cost-effective, if was less possibility of idle is bigger, plus the boot power is larger, if not the batch processing is not cost-effective, because the cost of the blade is relatively high, so to buy the machinery for bulk processing, it is very cost-effective.
5. Processing ceramic tile mosaics is faster, has pre-cut function, and the last 1 cuts the knife, so the cuttingeffect will be better.