Stone dry hanging slotting machine and ceramic tile dry hanging slotting machine are mechanical equipment specifically used for slotting stone and ceramic tiles. Their main principle is to rotate or cut along the surface of stone or ceramic tiles through the drill bit or cutting tool inside the machine, thereby forming the required perforation or groove.

These two types of slotting machines typically include mechanical equipment and electrical equipment in their structure. The mechanical equipment section includes motors, reducers, drill bits or cutting tools, and operation panels, while the electrical equipment section includes frequency converters, control systems, etc. These parts work together to enable the machine to operate according to the set parameters and achieve the slotting function of stone or ceramic tiles.

When using stone dry hanging slotting machines and ceramic tile dry hanging slotting machines, certain operating procedures need to be followed. Firstly, determine the starting status of the machine before operation and check if the switch is set correctly. Then, place the stone or ceramic tiles on the workbench, adjust the positioning device to ensure accurate positioning, and adjust the height of the workbench. Next, turn on the motor and observe if the speed is normal without any abnormal noise. When changing the length of the slotting tool, the motor must be turned off first, and the tool must be replaced before restarting the motor. During the operation, attention should be paid to the safety of hands and stones or tiles to avoid hand injuries or product damage.

The advantages of stone dry hanging slotting machines and ceramic tile dry hanging slotting machines mainly include high stability, good visual effects, and low construction difficulty. By using equipment for slotting and drilling, high stability can be achieved, especially in stormy weather. Due to the fact that stone or ceramic tiles can be directly embedded into the structural curtain wall without exposing their thickness, the visual effect is improved. In addition, the construction difficulty is relatively small, and only steps such as waterproofing treatment, slotting, opening holes, and installing brackets are needed to complete the construction.

However, there are also some drawbacks to stone dry hanging slotting machines and ceramic tile dry hanging slotting machines. Firstly, the installation cost is relatively high as it requires professional equipment and technology for slotting and drilling. Secondly, the opening positions of stone or ceramic tiles are limited and require careful design to achieve a better placement effect.

Overall, stone dry hanging slotting machines and ceramic tile dry hanging slotting machines are commonly used equipment in stone and ceramic tile processing, which can improve construction efficiency and quality. During use, it is necessary to follow operating procedures and pay attention to safety and maintenance to ensure the normal operation of the equipment and extend its service life.