The tutorial for using the stone bridge cutting machine includes the following main steps:

Preparation for operation: Select suitable saw blades (such as hemp or marble saw blades) based on the processed stone, check the sharpness of the blade, and ensure oil The oil level in the tank is within the specified range, and check if the workbench is milled flat.

Parameter settings: Set the machining range, feed rate, and feed rate to ensure that the host current does not exceed the specified value during operation.

Equipment operation: Turn on the power switch and check if the mechanical, electrical, and water components are functioning properly; Test the machine and adjust the up and down travel switch of the saw blade

Limit to the appropriate position; Manually adjust the host to the left limit and upper limit, and manually adjust the advance and retreat to the cutting position; Enter the corresponding number in the PC

According to the report, open the water supply gate valve, press the main engine start button, and manually adjust the left and right limits of the saw blade travel limit slider to the appropriate position; Press

Automatic cutting button, the system will cut according to the set program.

Attention: Before processing, check the sharpness of the saw blade and whether the workbench is milled flat; Check whether the oil level in the hydraulic oil tank is normal before work; Processing process Pay attention to the supply of cooling water at all times; Check if there are any foreign objects blocking the rotation or erection of the workbench under the workbench; Walking or working before and after the main beamBefore rotating the table, the saw blade must be raised to the upper limit position.Maintenance: Move the knife holder to the side of the edge beam after work.