Stone hand cranked cutting machine

Stone hand cranked cutting machine is a specialized equipment for stone processing, which achieves functions such as cutting, chamfering, and trimming of stone through manual operation. The following is a detailed introduction to the stone hand cranked cutting machine:

1、 Basic Overview

The stone hand cranked cutting machine is mainly composed of a head longitudinal movement system, a transverse movement part, a main cutting part, and a worktable motion system. By manually shaking the handle to drive the horizontal screw, the screw drives the diamond saw blade to move laterally through the nut, achieving stone cutting. At the same time, the electric motor drives the reducer and transmits the rotational motion to the longitudinal screw through the coupling, achieving the up and down movement of the saw blade. This device has the characteristics of easy operation, strong flexibility, and wide applicability.

2、 Working principle

Main motion system: The large pulley is driven by an electric motor, and then the main shaft is rotated by a small pulley, thereby driving the diamond saw blade to rotate.

Feed motion: The worktable performs feed motion along the cutting direction to achieve continuous cutting of stone.

Lateral movement: The lateral screw is driven by a manual handle, and the screw drives the diamond saw blade to move laterally through a nut to adapt to cutting stones of different widths.

3、 Characteristics and advantages

Portability: The stone hand cranked cutting machine is small in size, light in weight, easy to carry and move, and suitable for use outdoors or in places with limited space.

Flexibility: By manual operation, the cutting angle and depth can be flexibly adjusted to meet different processing needs.

Economy: Compared to electric or automated cutting equipment, stone hand cranked cutting machines have lower costs and are suitable for small processing plants or personal use.

Widely applicable: It can be used for cutting, chamfering, trimming and other processing of various stone materials such as marble, granite, quartz, etc.

4、 Precautions for use

Pre operation inspection: Before use, the equipment should be checked for any malfunctions or wear to ensure that it is in good condition.

Safety protection: Operators should wear appropriate protective equipment, such as goggles, gloves, etc., to prevent injury from flying debris.

Proper installation of saw blades: Ensure that the saw blades are installed correctly, sharp, and undamaged to improve cutting efficiency and safety.

Smooth operation: During the cutting process, the equipment should be kept stable and avoid shaking or tilting to avoid affecting the cutting quality.