How to use the stone thickness machine

The use of stone thickness machine mainly includes the following steps:

Preparation stage: Firstly, determine the stone materials to be processed and the required thickness to be achieved. Check whether the stone thickness machine is in good condition, including whether the water and electricity are normal, whether the grinding head and cutting head are worn, etc.

Adjust settings: According to the characteristics and processing requirements of the stone, adjust the processing thickness knob on the thickness machine and rotate it to the corresponding position. If it is an electronically adjustable thickness machine, the thickness size can be controlled by adjusting the button to ensure that the accuracy meets the requirements.

Start the machine: Connect the power supply and turn on the thickness gauge machine. Before starting, ensure that all safety devices are correctly installed and in working condition.

Processing: Put the stone materials to be processed into the thickness setting machine, adjust the feed speed and start processing. During the processing, it is necessary to closely observe the processing of the stone to ensure that the processing thickness is uniform and consistent.

Inspection and adjustment: Through observation and inspection during the processing, adjust the processing thickness knob or adjustment button in a timely manner to achieve the desired processing thickness. At the same time, pay attention to checking whether the stone is skewed, cracked, and other problems, and promptly deal with them.

Completion and cleaning: After processing is completed, turn off the power of the thickness machine and clean the machine and work area. Take out the processed stone materials for subsequent processing or storage.

When using a stone thickness machine, the following precautions should also be taken:

Adhere to safety operating procedures to ensure personal and equipment safety.

Regularly inspect and maintain the thickness gauge machine to maintain its good condition.

Reasonably use and adjust processing parameters to ensure processing quality and efficiency.