NEWS

quartz stone countertop edging machine

2024-10-29

The quartz stone countertop edging machine is one of the indispensable equipment in stone processing, which is specifically used for edging and polishing quartz stone countertops. The following is a detailed introduction to the quartz stone countertop edging machine:


1、 Working principle


The working principle of the quartz stone table edge grinder is mainly based on the principles of particle grinding and physical chemistry. As the abrasive particles move from coarse grinding to fine grinding and polishing, the marks of the grinding block on the surface of the stone gradually decrease until they are invisible to the naked eye, presenting a smooth, flat, and delicate effect on the surface. During the polishing process, there are also two stages of "dry polishing" and "wet polishing" to achieve the best glossiness and polishing effect.


2、 Structural composition


The quartz stone table edge grinder is usually composed of a turntable, a vertical shaft, a grinding wheel, and other parts. The turntable is used to fix the workpiece and can rotate on its own; The vertical shaft supports the grinding wheel and achieves high-speed rotation through the drive of the electric motor. In addition, some high-end quartz stone countertop edge grinders may also be equipped with CNC systems, automatic feeding devices, etc. to improve processing efficiency and accuracy.

20170803165727.jpg

20170803165740.jpg

quartz-edge-processing.jpg

timg (1).jpg

暴风截图201911125603976.jpg

3、 Usage steps


Prepare tools and materials: including edging machine, edging wheel, quartz sample block, lubricating oil, etc.


Fixed workpiece: Place the quartz stone sample block flat on the workbench of the edging machine, adjust the position of the stone so that it can be firmly clamped.


Adjust the edge grinding wheel: Adjust the angle and height of the edge grinding wheel to make it conform to the edge of the stone, with full contact surface.


Lubrication: Before starting the machine, it is necessary to drip lubricating oil onto the grinding wheel to ensure the normal operation of the hydraulic system during grinding.