NEWS

Manufacturing of rock slab dining table and sideboard cabinet

2024-11-03

2fed89a7c47947f6b1d615607eb87133.jpg

d7986e4198d241b4a961b6bd80059c72.jpg

Manufacturing of rock slab dining table and sideboard cabinet

There are two main methods for making kitchen countertops with rock slabs

IMG_20210824_110530.jpg

IMG_20210824_114205.jpg

IMG_20210824_145107.jpg

IMG_20210824_101137.jpg

The first type is similar to a conventional quartz stone countertop, where the front hanging edge is rotated at a 45 degree angle to a 45mm right angle, and a 60mm high single-sided water blocking strip is used for water blocking during later installation. This method is the same as our usual way. After the installation of the water barrier is completed, make a beautiful joint between the water barrier and the wall.

98147d8e7b30407bb3d068236b76f28e.jpg

177d660edb5449e89ef4c24f5050f6b7.jpg

7d0b891c9fb5466fb7a2d55d017b3f84.jpg

The second method is to directly suspend the front edge of the rock slab table at the thickness of a single layer of rock slab, without making a 45 degree right angle turn of 45mm. The method of rear water blocking is the same as the first method. This approach is more minimalist and aesthetically pleasing than the first one. However, this approach requires cooperation from the cabinet side, as there are clear requirements for the height of the cabinet and the height and position of the cover on the cabinet door panel.